Our services include:

• Installation of Pre-Finished and Unfinished wood floors
• Installation of Laminate and Engineered wood floors
• Sanding and Staining of hardwood floors
• Refinishing and Repair of hardwood floors

Installation

There are three ways to install a hardwood floor:

1.			Nailing down solid wood or strip floor to the plywood or plank wood sub-floor.
2.			Gluing down engineered strips or parquet squares  directly to the concrete sub-floor.
3.			Floating installation by gluing together the grooves of each plank of engineered floor or locking laminate pieces without glue if planks have locking system.

Sanding

Restoration of hardwood floors will transform any old floor your might have and make the floor look like new.

• Dull and worn finish from years of use.
• Scuff marks and scratched finish from furniture.
• Water and pet stains from spills and and pets
• Deep gouges and grain raise from heavy traffic or other abuse.

After any fixing you may or may not have, we sand the floor several times depending on wood specie is being sanded, and every time we use different grid of sand paper from the roughest to finest, to have the smoothest finish which is toped with protective coats.

Staining

Stains come in different colours and shades that could match any decor ideas that you might have. They are designed to penetrate the wood and to enhance the look of the grain. It also seals the wood and takes the place of finishing coat acting like wood sealer.

Finishing

After the floors are sanded and/or stained we clear them from any dust and apply the first coat of urethane, then we allow it to dry over night and when the weather factors permit and everything is sufficiently dry we buff the floor again and put the next coat to adhere properly. After this dries 2 more coats of urethanes are applied.

All polyurethanes  are available in three choices, all in water or oil base:

• High-gloss
• Semi-gloss 
• Satin

We will provide your free quote within 24 hours.